Automatic foam sealing machine is a kind of dispensing packaging equipment, which can be used in the production of chassis cabinet, filter, sheet metal, automobile, lighting and other industries.It can help operators quickly and efficiently complete different dispensing operations, and has been widely used in industrial production.
The automatic foam sealing machine machine is highly intelligent, and the use method is relatively simple. After relevant debugging, we only need to import the CAD or dxf file picture into the automatic dispensing machine, and the machine can execute the dispensing path according to the drawings, and easily perform the normal dispensing work.The commissioning method of the automatic dispensing machine is briefly described below. First, select the appropriate debugging environment. The commissioning of the automatic dispensing machine should be carried out in a dry and low pollution environment, and the machine should be flat on a stable foundation to check whether the voltage of the whole working circuit is stable, whether the working gas source providing the glue is stable without leakage, etc. These are important factors to ensure the normal implementation of the commissioning work.
Second, choose the automatic dispensing machine needle. The diameter of the needle should be 1 / 2 of the diameter. In the dispensing work, according to the appropriate size of the product dispensing needle, different sizes of products should choose the appropriate needle.The automatic dispensing machine is 0.005 ml less than the standard amount, the stainless steel needle has a smaller inner diameter is 0.1 mm, and the smaller inner diameter is 0.1 mm. Attention should be paid to the height of the dispensing needle to the circuit board and the inner diameter of the needle are also more important parameters, so special attention should be paid when choosing the needle.
Third, the dispensing time and the dispensing amount are set. The amount of dispensing time of automatic dispensing machine should be set as 1 / 2 of the product spacing to ensure enough dispensing to paste components to prevent excessive glue from seeping out.The amount of automatic dispensing machine can be adjusted by the time of dispensing machine. In the real production, the amount and the time of dispensing glue can be adjusted according to the specific situation.